Instructions
of domestic and technical appliances
Hob
If you are staying in the Windroos Safari Tent, the four-burner hob is supplied by a gas cylinder. If the cylinder is empty, come to reception and we will help you further.
Dishwasher
- Open the dishwasher door.
- Press the 'on-off' button.
- Select the desired programme by using the programme button.
- Close the dishwasher.
Want to know more? Check out the manuals:
Oven
Range hood
Appartement de Caisson
On the left side of the kitchen, there is a rotary knob. The knob is normally in the upright position. The extractor hood is then off. To turn it on, turn the knob to the left for setting 2 or to the right for setting 3. Return the knob to the upright position to switch the extractor hood off. Note: this extractor hood is almost silent, so it may seem like it isn’t working, but it actually is.
Bungalows (all types)
To turn on the extractor hood, slide it out towards you. To turn it off, slide it back away from you. This extractor hood has an internal filter. The air is therefore not vented outside, but filtered.
Combi microwave
Microwave
- Press the microwave button to select the microwave function. P100 appears on the display.
- Press microwave repeatedly or turn the time/weight/auto menu dial to adjust the microwave power level.
- Press the start/ok button to confirm the microwave power level.
- Turn the time/weight/auto menu knob and set the cooking time.
- Press the start/ok button to start the set programme.
Hot air oven
- Press the hot air button once. 150 appears in the display.
- Turn the time/weight/auto menu control knob and set the desired temperature.
- Press the start/ok button to confirm the set temperature and then start/ok to start the set programme.
- Two beeps sound when the desired temperature is reached.
- Place the dish in the oven and close the door. Turn the time/weight/auto menu knob and set the cooking time.
- Press the start/ok button to start the set programme.
Grilling
- Press the grill/combi button once. G-1 flashes.
- Press the start/ok button to select the set programme.
- Turn the time/weight/auto menu control knob and set the cooking time.
- Press the start/ok button to start the set programme.
- Two beeps will sound when half of the grilling time has elapsed. For better grilling results, it is recommended to turn the dish at this time.
- Press start/ok again to resume grilling.
Combination cooking
- Press the grill/combi button once. G-1 flashes.
- Turn the time/weight/auto menu control knob and set the desired programme.
- Press the start/ok button to select the set programme.
- Turn the time/weight/auto menu control knob and set the cooking time.
- Press start/ok to start the set programme.
Want to know more? Check out the manuals:
Thermostat
You can adjust the temperature by using the - and + buttons.
When you want to set the temperature, you see the set temperature as long as the °C symbol is flashing. You see the actual room temperature when it is not flashing. The set temperature will be maintained so long as you are present.
There is a built-in movement sensor so that it knows whether you are present or not. After six hours without movement, the thermostat will reset itself to a standby temperature of 17°C. You can activate the thermostat again on your return by touching the - or + buttons.
Do not turn the radiator knobs.
Nespresso
Streaming
Have you booked an accommodation? Almost all accommodations offer the possibility to watch or listen to your favourite films, series music (Spotify and Radio) via casting on our TVs.
If you have a subscription to services such as Ziggo Sport, RTL XL, Netflix and Videoland, you can also simply watch or listen to them via TV during your holiday.
- Select HDMI on your TV with the source or input button on the remote control.
- Connect the device you want to stream from to our WiFi network. Your accommodation has its own internet modem that is connected to the TV, so the quality is the same whether you are connected to the free or premium WiFi.
- Scan the QR code shown on the TV screen. The TV will connect to your device automatically.
If you don’t have a camera on your device or the code can’t otherwise be scanned, please click here.